Custom Gates
Custom Gates, Gate Openers & Gate Repair in Las Cruces, NM
Driveway, courtyard, and side gates in steel or wood-and-steel, with Zia, sun, mountain, or cross cutwork, plus repair of sagging and broken gates.
- 5.0 star rating · 89 Google reviews(opens in new tab)
- Best of 2025 & 2026 · BusinessRate
- Insured
Overview
Custom Gates from a Local Shop
We fabricate and install custom gates across Las Cruces and Doña Ana County, including double driveway gates, courtyard entry gates, walk gates, and side-yard gates. Every gate is built to the opening in our shop and hung by our crew, so it swings true and latches clean.
Our biggest gate tells you how we work. St. Genevieve's asked us to restore the roughly 135-year-old prayer garden gate that once stood at the original St. Genevieve's church in Mesilla. It is about 20 feet wide and 15 feet tall, and only about 10 percent of it was still good enough to reuse. We rebuilt the other 90 percent from photos in the church archive, in 45 days, working out of a three-car garage because the gate was too big for our shop. It was finished on time for the church's annual festival.
Most gates are smaller, but they get the same care. We have built red double driveway gates with a Zia diamond, courtyard gates with a gold spiral sun, and wood-and-steel gates with a three-cross cutout. We also install sliding and double-arm automatic gate openers, solar powered or hard-wired. If your old gate is sagging or rusted at the hinges, we repair that too.
What We Build
Types of Custom Gates
Driveway gates
Single and double swing gates sized for trucks, trailers, and RVs.
Courtyard and entry gates
Arched or square gates for adobe and stucco courtyards.
Side-yard and walk gates
Matching gates for side yards, AC access, and backyard entries.
Wood-and-steel gates
Steel frames filled with wood or composite for full privacy.
Church and commercial gates
Arched and lettered gates for churches, businesses, and RV parks.
Automatic gate openers
Sliding and double-arm openers, solar powered or hard-wired.
Gate repair
New hinges, re-welded frames, raised gates, and new latches.
Our Work
Recent Custom Gates Work
Every photo here is our own work, built in our Las Cruces shop and installed by our crew.
Reviews
What Customers Say
“Jason took my ideas and made the security screen exactly as I had envisioned. I was given a wide variety of colors for my Zia on the gate, and when I asked for a hare in the center he gave me a couple of options for it.”
“Jason installed a front security screen door, two backyard gates, and a custom screened-in enclosure that is just beyond our expectations. A professional craftsman who takes pride in his work, and his pricing was very reasonable.”
“Jason repaired my old iron gate. The hinges had rusted and broken, so he welded new parts and raised the gate so it opens from either side now. Quality work at a reasonable price, and he stays in contact by text and call.”
Hired us before? Leave a Google review (opens in new tab)
How We Build
Gates That Keep Swinging
- Frames squared and cross-braced so a wide gate does not sag over time.
- Hinges and posts sized to the weight of the gate, not the lightest part on the shelf.
- Cutwork designed with you: Zia, sun, mountains, crosses, or your own logo.
- Built to handle strong sun and wind-blown sand on the East Mesa and the valley floor.
Service Area
Custom Gates Across Doña Ana County
Based on Sand Hill Rd in Las Cruces, we build and install custom gates throughout the county.
Built by Jason Moreno
Jason Moreno owns SW Service & Solutions LLC, a small family fabrication shop on Sand Hill Rd in Las Cruces. He visits every job before pricing it, points out the failure points on what you have now, and builds each project as if it were his own.
How It Works
Get a Free Estimate
Call or Text Us
Tell us what you need built or fixed. A photo of the job helps.
We Come See It
We set a date and time to look at the project in person.
Talk Through the Design
Jason walks the job with you, points out any failure points, and works through design ideas.
Estimate by Email
Your written estimate arrives by email a few days later.
Rather talk? Call or text (602) 689-3084.
- 5.0 star rating · 89 Google reviews(opens in new tab)
- Best of 2025 & 2026 · BusinessRate
- Insured
Request a Free Estimate
Name and phone are all we need to start. We call or text you back to set up a visit.
FAQ
Custom Gates Questions
It depends on the width, whether it is a single or double gate, the fill (steel bars, solid panel, or wood), and how much cutwork you want. Call or text to set up a visit. We look at the opening, talk design, and email your estimate a few days later.
Yes, and we do it often. We install sliding and double-arm gate openers, either solar powered or hard-wired, on the gates we build and on many existing gates.
Often, yes. Broken or rusted hinges, cracked welds, sagging frames, and gates dragging on the ground are all repairs we do on-site. If the frame is too far gone to be worth fixing, we will tell you that straight.
Yes. We build black steel frames filled with wood or wood-look composite for privacy. We can also add a steel transom with a Zia or other cutout across the top so it matches your fence or privacy screen.
Ready for Custom Gates?
Call or text to set up a visit. We look at the job, talk design, and email your estimate a few days later.